Victorian and Geometric Panels and Windows. Click on the thumbnail to view the full size picture.

A front door for a very nice craftsman style house here in Austin. The pic on the left is the indoor view, on the right is the outdoor view. A simple design, but I think it turned out really nicely.

A replacement window for a couple who were moving. GNA and Bevels and stuff.

 

The first of three pieces for a house in Harris Branch here in Austin. Beveled Texas stars with flemish.

 

The second piece, an arch-top window in the bedroom.

 

The third, a sort of free-form victorian design above the bath.

 

A FLW-ish front door here in Austin. See the martini glass?

 

This panel for a very large pantry door was surprisingly difficult to lead up. The design was adapted from a tile in the kitchen. The repetitive pattern ended up being a sort of "locking" pattern that took quite a bit of finageling to get together. I really like the finshed look.

A cabinet door based on a clear victorian panel I had done several years ago. The colors were chosen to match the granite in the client's kitchen.

A sidelight and transom in fairly classic victorian design.

A celtic cross for Things Celtic. It turned out a little too monochrome in the picture, but in real life there is a good contrast between the glass colors.

 

This one was a Texas star bevel with bevels all the way around the border. All the bevels except the 8 square ones had to be custom sizes. It took a couple of tries to get the star bevels right. It is installed in a door here in Austin.

 

 

A couple from Michigan who were remodeling their house ordered this nice and simple victorian style beveled piece.

 

 

These two octagon windows went into the Carl residence here in Austin. They kept me busy for quite a while.

 

 

The Carl's front door. The figure in the middle of the door was a piece they already had. I designed a surround and matched the design for the sidelight. There's both an indoor and outdoor view here, but neither picture turned out as well as I had hoped.

 

 

A door panel for some friends of mine whose house burned down in 1998. They rebuilt a beautiful new home on the lot and I put this in an 8 foot mahogany door. It's sort of a prairie inspired design.

 

 

A piece for a front door for a guy who teaches auto shop at a local high school here. It was designed to match an existing window in the house that was quite old. It was a real challenge to match some of the glass in here.

 

 

 

 

The Haddad's window. This has to be the most unusually sized piece I have ever done. It is over 8 feet high, and just over 10 inches wide. A friend of mine removed the wall heater from his older home and installed central heat and air. the resulting hole made a nice passageway between the office and the living room until I put this piece in. It's a kind of unique pattern that he came up with after looking through a few of my old pattern books.

 
 

 

I did a series of 3 windows for the Coffman residence here in Austin this summer. This is a door insert.

 
 

 

These two hang in the Coffman's stairwell and the bathroom. All three are basically the same design, although the sizes range from 15 inches square to 36 inches square.

 
 

 

This is a 20"x11" panel of a fluer-de-lis type design which incorporates 6 rectangular bevels. The colored glass is all GNA.

 
 

 

A 12"x23" panel with a beveled fluer-de-lis, and triangular bevels above and below it. The blue and green glass are both GNA

 
 

 

A larger (36"x48") Victorian installed in a private residence in Laredo,TX. The red glass at the top of the figure is a from a beautiful piece of hand-cast glass that went from orange to black and from about 3/64" to 1/4" thick!

 

 

 

A medium sized free-hanging panel. The design was based on a small drawing that my wife found of a Jainist jar. I eliminated the bulk of the body of the jar, and it ended up looking fairly Victorian. As for my color selection, at the first show where I took the panel, someone came up, looked at it and said just,"Wow! Bold!"

 

 

 

 

I did this window (and another very similar one which I never got a good picture of) for a couple here in Austin, TX. The purple background is a strange glass I got when I bought another glass artist's stock out several years ago. I have no idea who manufactured it, and I have never seen any other glass like it (even in other colors). The window is 38" high x 22" wide, and is installed over a tub.

 

 

 

 

A victorian design using all textured clear glass. The pattern is a variation on a fairly standard victorian design. The piece is approx. 16" x 16" and framed in oak.

 

 

Another fairly standard victorian design. I used purple GNA and clear glue-chip on this 15" x 11" panel. It was sold at Christmas several years ago to a woman who was going to give it to a friend of hers in New York.

 

 

 

e-mail us

 

/Home/Photos/Info/Links/Ouch/Books/e-mail/